Published Papers
| 94 | "Development of Glossy and UV-Resistant Urushi Coatings by Thermal Polymerization", Chieko Narita, Kazushi Yamada*, Progress in Organic Coatings, 186 (2024) 108032. (https://doi.org/10.1016/j.porgcoat.2023.108032) |
| 93 | "Improving the lightfastness and thermal stability of black urushi (oriental lacquer) by kraft lignin oleate", Takao Tsuchiya, Chieko Narita, Kazushi Yamada, Adrian Moreno, Mika H. Sipponen, Hitomi Tsuda and Yoko Okahisa, Journal of Wood Science, 69, Article number 28 (2023). (https://doi.org/10.1186/s10086-023-02101-5) |
| 92 | "Novel Environmentally Superior Tribomaterial with Superlow Friction: 100% Cellulose Nanofiber Molding", Hikaru Okubo, Hiromi Hashiba, Toru Inamochi, Kaisei Sato, Shinya Sasaki, Kazushi Yamada, Ken Nakano, Tribology Lettters, 71, 83 (2023). (https://doi.org/10.1007/s11249-023-01754-z) |
| 91 | "Tribological properties of 100% cellulose nanofiber (CNF) molding under dry- and boundary lubrication-conditions at CNF/steel contacts", Hikaru Okubo, Ryota Nakae, Daisuke Iba, Kazushi Yamada, Hiromi Hashiba, Ken Nakano, Kaisei Sato, and Shinya Sasaki, Cellulose (2023). (https://doi.org/10.1007/s10570-023-05309-2) |
| 90 | "Characteristics of urushi film prepared through thermal polymerization", Chieko Narita, Yoko Okahisa, Saori Kitaguchi, Kazushi Yamada, Journal of Coatings Technology and Research (2023). (https://doi.org/10.1007/s11998-022-00745-4) |
| 89 | "Preparation of transparent fibroin nanofibril-reinforced chitosan films with high toughness and thermal resistance", Yuno Yasunaga, Yuji Aso, Kazushi Yamada, Yoko Okahisa*, Carbohydrate Polymer Technologies and Applications, 5 (2023) 100299. (https://doi.org/10.1016/j.carpta.2023.100299) |
| 88 | "Isothermal crystallization process and thermal analysis of polylactic acid/cotton fiber composites during thermal degradation", Linmei Zhang, Jiaru Zhou, Hiroki Sakamoto, and Kazushi Yamada*, Polymer-Plastics Technology and Materials (2023) 2175220. (https://doi.org/10.1080/25740881.2023.2175220) |
| 87 | "No-Surface-Damage Laser Welding of Fluoroplastic Sheets： Welding of PFA and PTFE Sheets", Kimitoshi Sato, Kazushi Yamada, Vol.35 No.2, Seikei-Kakou (2023), pp.63-70. (https://doi.org/10.4325/seikeikakou.35.63) |
| 86 | "Effects of Urushi and Sumi ink on the mechanical properties and water repellency of Washi paper", Chieko Narita, Kazushi Yamada, Journal of Polymer Research (2023) 30;39. (https://doi.org/10.1007/s10965-022-03416-5) |
| 85 | "Effect of surface treatment of cotton fibers on the durability of polylactic acid/cotton-fiber biocomposites", Linmei Zhang, Jiaru Zhou, Hiroki Sakamoto, Kazushi Yamada*, Advanced Composite Materials (2022) 2055515. (https://doi.org/10.1080/09243046.2022.2055515) |
| 84 | "Development of highly oil-absorbent polylactic-acid microfibers with a nanoporous structure via simple one-step centrifugal spinning", Linmei Zhang, Chieko Narita, Yuki Himeda, Hidekazu Honma, Kazushi Yamada*, Separation and Purification Technology, 282 (2022) 120156. (https://doi.org/10.1016/j.seppur.2021.120156) |
| 83 | "A novel approach of adhesive property of cellulose nanofibers obtained from the discarded wooden part of Kozo plant", Chieko Narita*, Yoko Okahisa, Kazushi Yamada, Applied Nanoscience, 2021, Vol.11, PP.2717-2726. (https://doi.org/10.1007/s13204-021-02151-5) |
| 82 | "Influence of residual chlorine and pressure on the degradation of water pipes of polyethylene of raised temperature", Takehiro Fujii, Hideo Hirabayashi, Yuichi Matsui, Kazushisa Igawa, Hidekazu Honma, and Kazushi Yamada*, Polymer Degradation and Stability, 194 (2021) 109760. (https://doi.org/10.1016/j.polymdegradstab.2021.109760) |
| 81 | "Evaluation of degradation of ultraviolet-C irradiated polylactic acid/carbon-fiber composites using fluorescence spectroscopy", Badin Pinpathomrat, Chieko Narita, Atsushi Yokoyama & Kazushi Yamada*, Advanced Composite Materials, 2021, Vol.30, 1943108. (https://doi.org/10.1080/09243046.2021.1943108) |
| 80 | "Fabrication and characterization of a novel silk fibroin film with UV and thermal resistance", Yoko Okahisa, Chieko Narita, Kazushi Yamada*, Materials Today Communications 25 (2020) 101630. (https://doi.org/10.1016/j.mtcomm.2020.101630) |
| 79 | "Characterization of Ground Silk Fibroin through Comparison of Nanofibroin and Higher Order Structures", Chieko Narita*, Yoko Okahisa, Isao Wataoka, and Kazushi Yamada*, ACS Omega, 2020. (https://doi.org/10.1021/acsomega.0c01750) |
| 78 | "Comparison of Polyvinyl Alcohol Films Reinforced with Cellulose Nanofibers Derived from Oil Palm by Impregnating and Casting Methods", Yoko Okahisa*, Kenichiro Matsuoka, Kazushi Yamada, Isao Wataoka, Carbohydrate Polymers, Vol.250 No.116907, 2020. (https://doi.org/10.1016/j.carbpol.2020.116907) |
| 77 | "The effect of UV irradiation on polyamide 6/carbon-fiber composites based on three-dimensional printing", Badin Pinpathomrat, Kazushi Yamada*, Atsushi Yokoyama, SN Applied Sciences, Vol.2, article number 1518, 2020. (https://doi.org/10.1007/s42452-020-03319-4) |
| 76 | "ポリエチレン不織布を用いた滅菌バッグの熱接合部に及ぼす接合温度と接合圧力の影響", 橋本 靜生, 橋本 由美, 山田 和志, 宮田 剣, 日本包装学会誌, Vol.29, No.4, pp.293-298, 2020. |
| 75 | "Controlling the ordered transition of PS-b-P4VP block copolymer ultrathin films by solvent annealing", Yang Wang, Chieko Narita, Xinhe Xu, Hidekazu Honma, Yuki Himeda, Kazushi Yamada*, Materials Chemistry and Physics, Vol.239 (2020) 122072. (https://doi.org/10.1016/j.matchemphys.2019.122072) |
| 74 | "組紐ヒーターを用いたインパルスシーラーによる滅菌バッグへの接合温度保持時間の効果", 橋本 靜生, 橋本 由美, 山田 和志, 宮田 剣, 日本包装学会誌, Vol.28, No.4, pp.245-251, 2019. |
| 73 | "A Novel technique in the preparation of environmentally friendly cellulose nanofiber/silk fibroin fiber composite films with improved thermal and mechanical properties", Chieko Narita, Yoko Okahisa, Kazushi Yamada*, Journal of Cleaner Production, Vol.234, pp.200-207, 2019. (https://doi.org/10.1016/j.jclepro.2019.06.215) |
| 72 | "Influence of residual chlorine and pressure on degradation of polybutylene pipe", Takehiro Fujii, Yuichi Matsui, Hideo Hirabayashi, Kazuhisa Igawa, Saori Okada, Hidekazu Honma, Hiroyuki Nishimura, and Kazushi Yamada*, Polymer Degradation and Stability, Vol.167, pp.1-9, 2019. (https://doi.org/10.1016/j.polymdegradstab.2019.06.012) |
| 71 | "Preparation of Silk-Fibroin Nanofiber Film with Native β-Sheet Structure via a Never Dried-Simple Grinding Treatment", Yoko Okahisa*, Chieko Narita, Kazushi Yamada, Journal of Fiber Science and Technology, Vol.75, No.4, pp.29-34, 2019. (https://doi.org/10.2115/fiberst.2019-0005) |
| 70 | "Plasticizing effect of lignin on urushi in bio-composite films", Chieko Narita, Yoko Okahisa, Kazushi Yamada*, Polymer, Vol.161, pp.49-54, 2019. (https://doi.org/10.1016/j.polymer.2018.11.063) |
| 69 | "Effect of Surface Treatment of Cellulose Fiber (CF) on Durability of PLA/CF Bio-composites", Hirofumi Kyutoku, Nanaka Maeda, Hiroki Sakamoto, Hiroyuki Nishimura, Kazushi Yamada*, Carbohydrate Polymers, Vol.203, pp.95–102, 2019. (https://doi.org/10.1016/j.carbpol.2018.09.033) |
| 68 | "温水暴露された温水配管用ポリエチレンの劣化解析", 本間秀和, 松尾尚子, 伊東寛, 山田和志, 西村寛之, 成形加工, Vol.30, No.5, 215-219 (2018). |
| 67 | "Structure and fracture toughness of thin-wall polypropylene moulded at different injection speeds", Keisuke Maeda, Koji Yamada, Kazushi Yamada*, Masaya Kotaki, Hiroyuki Nishimura, Thin-Walled Structures, Vol.125, pp.12–20, 2018.(https://doi.org/10.1016/j.tws.2018.01.017) |
| 66 | "Effect of Cooling Temperature and Braid Heater for Heat Sealed Sterilized Bag", Yasuo Hashimoto, Yumi Hashimoto, Kazushi Yamada, Ken Miyata, Journal of Packaging Science & Technology, Japan, Vol.26, No.4, pp.185-190, 2017. |
| 65 | "Solvent Influence on Crosslinking and Surface Characteristics of Urushi Films", Chieko Narita, Kazushi Yamada*, and Tetsuya Tsujii, Materials Chemistry and Physics, Vol.199, pp.387-392, 2017.(https://doi.org/10.1016/j.matchemphys.2017.07.029) |
| 64 | "Nanofabrication of high throughput 30 nm hole 2D arrays by a simple visible laser ablation technique", Kazushi Yamada*, Chieko Narita, Ramanujam Kumaresan, Takuya Shinohara, Mitsuhiro Terakawa, and Yasuyuki Tsuboi, Applied Surface Science, Vol.420, pp.868-872, 2017. (http://dx.doi.org/10.1016/j.apsusc.2017.05.243) |
| 63 | "Influence of the type of Urushi and substrate on the chemical and physical properties of Urushi films", Chieko Narita, Kazushi Yamada*, Progress in Organic Coatings, Vol.105, pp.183-189, 2017. (http://dx.doi.org/10.1016/j.porgcoat.2017.01.004) |
| 62 | "A novel methodology for peel strength enhancement of heat-sealed oriented polypropylene/cast polypropylene film by tensile cyclic loading", Kazushi Yamada*, Ken Miyata, and Ramanujam Kumaresan, Materials Chemistry and Physics, Vol.187, pp.112-118, 2017. (http://dx.doi.org/10.1016/j.matchemphys.2016.11.054) |
| 61 | “Influence of the finishing methods of Urushi products on degradation”, Chieko Narita, Yutaro Shimode, Kazushi Yamada*, Progress in Organic Coatings, Vol.101, pp.379-384, 2016. (http://dx.doi.org/10.1016/j.porgcoat.2016.07.024) |
| 60 | "バガス繊維複合化ポリ乳酸の機械的特性と熱特性", 阪本浩規, 今村信幸, 西野雄大, 川崎真一, 山田和志, 西村寛之, 成形加工, Vol.28 No.3, pp.119-125, 2016 (https://doi.org/10.4325/seikeikakou.28.119) |
| 59 | "セルロースナノファイバーとポリ乳酸の複合材料と特性", 阪本浩規, 山田和志, 西村寛之, マテリアルライフ学会誌, 28 [1], pp.12-21, 2016 |
| 58 | "The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution", Keisuke Maeda, Koji Yamada, Kazushi Yamada*, Masaya Kotaki, Hiroyuki Nishimura, Advances in Materials Physics and Chemistry, 6, 1-8, 2016. (http://dx.doi.org/10.4236/ampc.2016.61001) |
| 57 | "Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene", Keisuke Maeda, Koji Yamada, Kazushi Yamada*, Masaya Kotaki, Hiroyuki Nishimura, Open Journal of Organic Polymer Materials, Vol.6, pp.1-10, 2016 (http://dx.doi.org/10.4236/ojopm.2016.61001) |
| 56 | "温水用PE管の各種試験条件における管の各種試験条件における耐久性評価", 井川一久, 本間秀和, 山田和志, 西村寛之, マテリアルライフ学会誌, Vol.27, No.3, pp.70-76 (2015) |
| 55 | "温水用PE管による熱間内圧クリープ試験の温度依存性と温水循環試験との比較評価", 井川一久, 本間秀和, 福西佐季子, 山田和志, 西村寛之, マテリアルライフ学会誌, Vol.27, No.3, pp.63-69 (2015) |
| 54 | "滅菌紙を用いた滅菌バッグの熱接合部に及ぼす接合圧力と組紐ヒーターの影響", 橋本由美, 橋本靜生, 山田和志, 宮田剣, 日本包装学会誌, Vol.24, No.6, pp.349-355, 2015. |
| 53 | "Molecular Orientation Effect of Heat-Sealed PP Film on Peel Strength and Structure", Kazushi Yamada*, Ken Miyata, Reiichi Konishi, Kiyomi Okada, Tetsuya Tsujii, Advances in Materials Physics and Chemistry, Vol.5, pp.439-446, 2015 (http://dx.doi.org/10.4236/ampc.2015.511044) |
| 52 | "Study on Characteristics of Gold Powder with Round Shape for Maki-e", Chieko Narita, Yutaro Shimode, Kazushi Yamada*, Materials Sciences and Applications, Vol.6, pp.841-849, 2015 (http://dx.doi.org/10.4236/msa.2015.610086) |
| 51 | "Synthesis of Polysilanes Using Mg and Lewis Acid and the Consideration of This Reaction Mechanism", Hiroaki Murase, Masayuki Sugimoto, Hiroyuki Nishimura, Kazushi Yamada, Materials Sciences and Applications, Vol.6, No.6, 576-590, 2015. (http://dx.doi.org/10.4236/msa.2015.66061) |
| 50 | "有機－無機ポリマーハイブリッドコーティング膜の 作製と特性評価", 松好弘明, 川崎真一, 山田和志, 西村寛之, ネットワークポリマー, Vol.36, No.3, pp.141-147, 2015. (http://doi.org/10.11364/networkpolymer.36.141) |
| 49 | "Effects of Polysilane-Coating on Interface of Electrofusion Joints for Maintaining Strength", Hiroaki Murase, Shinichi Kawasaki, Toshimichi Kitaoka, Jouji Furukawa, Hirofumi Ueda, Hiroyuki Nishimura, Kazushi Yamada, Materials Sciences and Applications, Vol.6, No.4, pp.322-331, 2015. (http://dx.doi.org/10.4236/msa.2015.64037) |
| 48 | "IR法を用いたポリエチレン成形体の劣化寿命予測", 岡田きよみ, 辻井哲也, 山田和志, 西村寛之, 高分子論文集, Vol.72, No.4, pp.149-154, 2015. (http://doi.org/10.1295/koron.2014-0072) |
| 47 | "低温焼成フッ素樹脂コーティング膜の物性と耐摩耗性に及ぼす 焼成温度の影響", 松好弘明, 川崎真一, 山田和志, 西村寛之, ネットワークポリマー, Vol.36, No.1 pp.29-37, 2015. (http://dx.doi.org/10.11364/networkpolymer.36.29) |
| 46 | "有機無機ハイブリッドコーティングの特性に及ぼす焼成温度の影響", 松好弘明, 川崎真一, 山田和志, 西村寛之, マテリアルライフ学会誌, 第25巻, 第1号, pp.17-22, 2015. |
| 45 | "Study on Properties of Silver Powder for Maki-e", Chieko Narita, Yutaro Shimode, Kazushi Yamada, Materials Sciences and Applications, Vol.6, No.1, pp.1-8, 2015. (http://dx.doi.org/10.4236/msa.2015.61001) |
| 44 | "加熱ATR-IR 法を用いたポリエチレンの酸化劣化時間測定および構造変化", 岡田きよみ, 辻井哲也, 山田和志, 西村寛之, 成形加工, Vol.26 No.10, pp.483-489, 2014. (https://doi.org/10.4325/seikeikakou.26.483) |
| 43 | "PETフィルムの劣化が引張特性に及ぼす影響", 井口昭則, 林崇太, 平林秀雄, 山田和志, 西村寛之, 成形加工, Vol.26, No.9, pp.444-449, 2014. (https://doi.org/10.4325/seikeikakou.26.444) |
| 42 | "Effectiveness of Compatibilizer on Mechanical Properties of Recycled PET Blends with PE, PP, and PS", Nobuyuki Imamura, Hiroki Sakamoto, Yuji Higuchi, Hiroyuki Yamamoto, Shinichi Kawasaki, Kazushi Yamada*, Hiroyuki Nishimura, Takahiro Nishino, Materials Sciences and Applications, Vol.5, pp.548-555, 2014. (http://dx.doi.org/10.4236/msa.2014.58057) |
| 41 | "植物由来樹脂複合材料の機械的特性と難燃性評価", 今村信幸, 樋口裕思, 阪本浩規, 大越雅之, 山本裕之, 山田和志, 西村寛之, 西野雄大, 川崎真一, 成形加工, Vol.26, No.3, pp.125-132, 2014. (https://doi.org/10.4325/seikeikakou.26.125) |
| 40 | "Thermally Induced Nanocrystal Array of Poly(N-Vinylcarbazole) on Si-Wafer Substrate", Kazushi Yamada*, Yasuyuki Tsuboi, Materials Sciences and Applications, Vol.5, pp.271-277, 2014. (http://dx.doi.org/10.4236/msa.2014.55032) |
| 39 | "Study on the Appearance and Peel Strength of Byakudan-nuri works",
Chieko Narita, Atsushi Endo, Yutaro Shimode, and Kazushi Yamada*, Materials Sciences and Applications, Vol.5, pp.81-85, 2014. (http://dx.doi.org/10.4236/msa.2014.52012) |
| 38 | "プラスチックフィルムの熱接合部に及ぼすヒーター形状の影響", 橋本静生, 橋本由美, 山田和志, 宮田 剣, 漆山智之, 成形加工, Vol.26, No.2, pp.88-92, 2014. |
| 37 | "FT-IRイメージング法を用いたポリエチレンの熱酸化劣化解析", 岡田 きよみ, 辻井 哲也, 山田 和志, 西村 寛之, 高分子論文集, Vol.71, No.1, pp.23-30, 2014. (http://doi.org/10.1295/koron.71.23) |
| 36 | "Evaluation of Degradation of PET Film by Partial Discharge Method", Akinori Iguchi, Hideo Hirabayashi, Takahiro Hayashi, *Kazushi Yamada, and Hiroyuki Nishimura, Materials Sciences and Applications, Vol.5, pp.33-38, 2014. (http://dx.doi.org/10.4236/msa.2014.51005) |
| 35 | "Effectiveness of Talc Filler on Thermal Resistance of Recycled PET Blends", *Kazushi Yamada and Supaphorn Thumsorn, Advances in Materials Physics and Chemistry, 3, 327-331, 2013. (http://dx.doi.org/10.4236/ampc.2013.38045) |
| 34 | "過酸化物架橋ポリエチレン管の安定剤による耐久性評価", 平林秀雄、井口昭則、山田和志、西村寛之、井川一久, マテリアルライフ, Vol.25, No.2, pp.42-50, 2013. |
| 33 | "Study on the Structure of Peroxide Cross-Linked Polyethylene Pipes with Several Stabilizers", Hideo Hirabayashi, Akinori Iguchi, *Kazushi Yamada, Hiroyuki Nishimura, Kazuhisa Ikawa, Hidekazu Honma, Materials Sciences and Applications, Vol.4, No.9, PP.497-503, 2013. (http://dx.doi.org/10.4236/msa.2013.49060) |
| 32 | "OPP/CPPフィルムの熱接合部および境界部の力学的特性に及ぼす接合温度の影響", 橋本靜生, 橋本由美, 山田和志, 濱田泰以, 日本包装学会誌, Vol.22, No.3, pp.227-236, 2013. |
| 31 | "Effect of Different Eggshell Powder on Appearance of Eggshell Maki-e", Yutaro Shimode, Chieko Narita, Atsushi Endo, Kazushi Yamada, Materials Sciences and Applications, Vol.4, pp.138-144, 2013. (http://dx.doi.org/10.4236/msa.2013.42016) |
| 30 | "Jute fabric reinforced engineering thermoplastic sandwich composites. I. The effect of molding time", Smith Thitithanasarn, Kazushi Yamada, Umaru S. Ishiaku and Hiroyuki Hamada, Journal of Applied Polymer Science, Vol. 127, 2952–2959, 2013. (http://dx.doi.org/10.1002/app.37962) |
| 29 | "Thermal decomposition kinetic and flame retardancy of CaCO3 filled recycled polyethylene terephthalate/recycled polypropylene blend", Supaphorn Thumsorn, Kazushi Yamada, Yew Wei Leong and Hiroyuki Hamada, Journal of Applied Polymer Science, Vol.127, 1245-1256, 2013. (http://dx.doi.org/10.1002/app.37673) |
| 28 | "Nano Porous Films Processing of Polymer Films Based on Localized Surface Plasmon Resonance of Au Nanoparticles", Keita MURAOKA, Kazushi YAMADA, Tatsuya SHOJI, Hiroyuki SUGIMURA, Noboru KITAMURA, and Yasuyuki TSUBOI, JLMN-Journal of Laser Micro/Nanoengineering Vol. 7, No. 3, pp.260-263, 2012. (http://dx.doi.org/10.2961/jlmn.2012.03.0005) |
| 27 | "The Effect of Curative Concentration on Thermal and Mechanical Properties of Flexible Epoxy Coated Jute Fabric Reinforced Polyamide 6 Composites", Smith Thitithanasarn, Kazushi Yamada, Umaru S. Ishiaku, Hiroyuki Hamada, Open Journal of Composite Materials, Vol.2, pp.133-138, 2012. (http://dx.doi.org/10.4236/ojcm.2012.24016) |
| 26 | "Effectiveness of High Frequency Heating on Drying and Intrinsic Viscosity Enhancement of Recycled Poly(ethylene Terephthalate)", Minoru Ogasahara, Manabu Shidou, Shigeru Nagata, Kazushi Yamada, Yew Wei Leong, and Hiroyuki Hamada, Journal of Applied Polymer Science, Vol. 126, E166–E171, 2012. (http://dx.doi.org/10.1002/app.34368) |
| 25 |
"SCFを用いたポリ乳酸の射出成形およびその発泡体の特性に関する研究", 国宗範彰, 長澤次男, 玉田周平, 国宗敬弘, 山田和志, Supaphorn Thumsorn, Yew Wei Leong, 濱田泰以, 成形加工, 査読有, Vol. 24, No. 9, pp.544-550, 2012. (http://dx.doi.org/10.4325/seikeikakou.24.544) |
| 24 | "PLAフィルムの熱接合部の力学的特性に及ぼす接合圧力の影響
", 橋本由美, 橋本靜生, 山田和志, 濱田泰以, 日本包装学会誌, Vol.21, No.2, pp.115-123, 2012. |
| 23 | "Effect of Pellet Size and Compatibilization on Thermal Decomposition Kinetic of Recycled Polyethylene Terephthalate/Recycled Polypropylene Blend", Supaphorn Thumsorn, Kazushi Yamada, Yew Wei Leong, Hiroyuki Hamada, Journal of Applied Polymer Science, Vol. 124, 1605–1613 (2012). (http://dx.doi.org/10.1002/app.35166) |
| 22 | "HDPE/LLDPEフィルムのヒートシール特性に及ぼすLLDPE添加量の影響", 橋本靜生, 橋本由美, 山田和志, 宮田剣, 成形加工, Vol.23, No.11, pp.691-697, 2011. (http://dx.doi.org/10.4325/seikeikakou.23.691) |
| 21 | "同時複合射出成形法を用いたPOM/PLA二層成形品の界面接着強度", 長井聡, 伊東顕, Wongsriraksa Patcharat, Supaporn Thumsorn, Yew Wei LEONG, 山田和志, 濱田泰以, 成形加工, Vol.23, No.9, pp.561-567, 2011. (http://dx.doi.org/10.4325/seikeikakou.23.561) |
| 20 | "OPP/CPPフィルムの熱接合部の力学特性に及ぼす接合圧力の影響", 橋本由美, 橋本靜生, 山田和志, Yew Wei LEONG, 濱田泰以, 日本包装学会誌, Vol.20, No.4, pp.273-282, 2011. |
| 19 | "リサイクルPETフィルムの未延伸と延伸フィルムの熱接合及び熱接合部の評価", 小西礼一，宮田剣，山田和志，Yew.W. LEONG，橋本靜生，濱田泰以, 日本包装学会誌, Vol.20, No.2, 107-115, 2011. |
| 18 | "Development of Cockleshell-Derived CaCO3 for Flame Retardancy of Recycled PET/Recycled PP Blend", Supaphorn Thumsorn, *Kazushi Yamada, Yew Wei Leong, Hiroyuki Hamada, Materials Sciences and Applications, 2011, 2, pp.59-69. (http://dx.doi.org/10.4236/msa.2011.22009) |
| 17 | "Influence of the Reactive Processing of Recycled Poly(ethylene terephthalate)/Poly(ethylene-co-glycidyl methacrylate) Blends", Noriaki Kunimune, *Kazushi Yamada, Yew Wei Leong, Supaphorn Thumsorn, Hiroyuki Hamada, Journal of Applied Polymer Science, Vol. 120, pp.50–55 (2011). (http://dx.doi.org/10.1002/app.32836) |
| 16 | "射出プレス成形における成形品ウエルドラインの評価", 納土賢悟, リオンユーウェイ, 山田和志, 濱田泰以, 成形加工, Vol.23, No.1, pp.56-62 (2011). (http://dx.doi.org/10.4325/seikeikakou.23.56) |
| 15 | "ナイロン/ポリエチレンフィルムの熱接合及び非熱接合部における境界部の力学的特性の評価", 小西礼一, 山田和志, 橋本靜生, 辻井哲也, Yew.W.LEONG, 宮田剣, 濱田泰以, 日本包装学会誌, 19 (2010), pp.461-473. |
| 14 | "金ナノ粒子表面プラズモン吸収を利用した ポリマフィルムのλ/10 ナノホール加工", *山田 和志, 坪井 泰之, レーザ加工学会誌(2009) 16(3), pp.202～205. |
| 13 | "絹フィブロイン超薄膜の2次構造の温度変化", * 山田 和志, 熱測定学会誌(2009), 36(5), pp.271-276. |
| 12 | "Evaluation of Molecular Orientation in Injection Molded Parts with Micro-Scale Features by Raman Spectroscopy", Osamu Murakami, *Kazushi Yamada, Masaya Kotaki and Hiroyuki Hamada, Journal of Applied Polymer Science, (2009), pp1607-1614. (http://dx.doi.org/10.1002/app.29607) |
| 11 | "滅菌紙を用いた滅菌バッグの熱接合部における力学的特性に及ぼす接合温度と接合圧力の影響", 橋本由美, 橋本靜生, 辻井哲也, Yew W. LEONG, 山田和志, 濱田泰以, 日本包装学会誌, Vol.18, No.4, 251-258, 2009. |
| 10 | "微細V 溝転写ポリカーボネート成形品の輝度特性に及ぼす転写率と複屈折の影響", 村上治, 山田和志, 小滝雅也, 濱田泰以, 成形加工, Vol.20 No.10, pp.762-768 (2008). (http://dx.doi.org/10.4325/seikeikakou.20.762) |
| 9 | "Nanohole processing of polymer films based on the laser-induced superheating of Au nanoparticles", *Yamada, K., Itoh, T., Tsuboi, Y., Applied Physics Express,1, 087001, 2008. (http://dx.doi.org/10.1143/APEX.1.087001) |
| 8 | "The Effect of Processing Conditions on Properties of A Heat-Sealed Sterilized Bag", Yumi HASHIMOTO, Yasuo HASHIMOTO, Tetsuya TSUJII, Kazushi YAMADA, Yew W. LEONG, Hiroyuki HAMADA, Journal of Packaging Science and Technology, 17, pp.265-273, 2008. |
| 7 | "Morphological Change of a Diblock Copolymer Film Induced by Selective Doping of a Photoactive Chromophore" , Shinjiro Machida, Hiroshi Nakata, Kazushi Yamada, and Akira Itaya, Journal of Polymer Science: Part B: Polymer Physics, Vol. 45, 368-375, 2007. (http://dx.doi.org/10.1002/polb.21050) |
| 6 | "Position-Selective Arrangement of Nanosized Polymer Microsphere on Diblock Copolymer Film with Sea-Island Microphase Structure", Shinjiro Machida, Hiroshi Nakata, Kazushi Yamada, and Akira Itaya, Japanese Journal of Applied Physics, Vol.45, pp.4270-4273, 2006. (http://dx.doi.org/10.1143/JJAP.45.4270) |
| 5 | "Surface ordering of spherical microdomains of blockcopolymers", Shinichi Sakurai, Akiko Sakamoto, Kazushi Yamada, Akira Itaya, Shu Hotta, Emiko Mouri, Hideki Matsuoka, International Journal of Applied Chemistry, Vol.1 pp.1-11, 2005, |
| 4 | "AFM Observation of Silk Fibroin on Mica Substrates; Morphologies Reflecting the Secondary Structure", *K. Yamada, Y.Tsuboi, and A.Itaya, Thin Solid Films, Vol.440, 208-216, 2003. (http://dx.doi.org/10.1016/S0040-6090(03)00460-7) |
| 3 | "Laser Ablation of Silk Protein (Fibroin) Films", Y. Tsuboi, H. Adachi, K. Yamada, H. Miyasaka, and A. Itaya, Japanese Journal of Applied Physics, Vol.41, 4772-4779, 2002. (http://dx.doi.org/10.1143/JJAP.41.4772) |
| 2 | "Light Can Transform the Secondary Structure of Silk Protein" (Rapid Communication), Y. Tsuboi, T. Ikejiri, S. Shiga, K. Yamada, and A. Itaya, Applied Physics A, Vol.73, 637-640, 2001. (http://dx.doi.org/10.1007/s003390100984) |
| 1 | "Preparation of a Novel Thin Film Utilizing a Magnetic Field: Alignment of Organic Microcrystals as Revealed by Atomic Force Microscopy", Y. Tsuboi, H. Akita, K. Yamada, and A. Itaya. Jpn. J. of Appl. Phys., Part 2, (1997), Vol.36, L1048-L1050. (http://dx.doi.org/10.1143/JJAP.36.L1048) |
Books
| 9 | 技術報告 "異なるヒーター形状での熱接合における熱伝導挙動", 橋本靜生, 橋本由美, 山田和志, 宮田剣, 2017, Vol.29, No.10, pp.374-376. |
| 8 | 海外だより "シンガポールで暮らして", 山田和志*, 成形加工, 2017, Vol.29, No.9, pp.330-332. |
| 7 | 解説”高分子材料の耐熱性・耐久性評価法”, 山田和志*, 成形加工, 2017, Vol.29, No.8, pp.287-290. |
| 6 | "第7章 バイオプラスチック（植物由来樹脂）のアロイ, 第1節 植物由来樹脂複合材料の特性評価", 山田和志*, 今村信幸, 西村寛之, S＆T出版「第三・第四世代ポリマーアロイの設計・制御・相容化技術」, 2016, pp.184-190. |
| 5 | "Using Visible Light Lasers and Gold Nanoparticles to Replace Expensive Lithography Micromachining Techniques", Kazushi Yamada*, Convertech International, 2016, Vol.1, pp.56-57. |
| 4 | "ガラスやPET基板に10～100nmのナノ加工 ～金ナノ粒子を配置して可視光レーザー照射～", 山田和志*, コンバーテック, 2016, Vol.5, pp.54-55. |
| 3 | 「PETボトルの回収および再製品化技術」, 山田和志, Polifile 2010, 8, 14-17. |
| 2 | 「製品機能をアップさせる二次加工技術」 ー接合・融着・多層化技術を中心にー 4章 直接加熱接合 4.2シート・フィルム材の熱接合, 橋本靜生, 橋本由美, 山田和邦, 辻井哲也, 山田和志, 濱田泰以, 成形加工学会誌, 第21巻 第1号, 2009, pp26-31. |
| 1 | "Polymer films: Shot from within", Research Highlights, Nature Nanotechnology Published online: 1 August 2008 | doi:10.1038/nnano.2008.244. |
Proceedings Papers
| 73 | "Mechanical Properties and Effects of Microfibrillation of 100% Biomass Sisal-PLA Composite", Hirofumi Kyutoku, Hiroki Sakamoto, Kazushi Yamada, Hiroyuki Nishimura, Yoshikazu Kondo, SPE ANTEC™ Technical Papers, 64, ANTEC2018, W03_349, pp.1-7. |
| 72 | “Durability Evaluation to Residual Chlorine on Plastic Pipes for Hot Water Supply - Third Report”, Takehiro Fujii, Hideo Hirabayashi, Kazushi Yamada, Hiroyuki Nishimura, Kazuhisa Igawa, and Yuji Higuchi, SPE ANTEC™ Technical Papers, 63, Anaheim 2017, pp.1982-1988, 2017. |
| 71 | “Surface Treatment of Crbon Fiber by Anodic Oxidation and Improvement of ILSS in CFRP”, Hirofumi Kyutoku, Masaaki Yoshikawa, Yoshikazu Kondo, Kazushi Yamada, and Hiroyuki Nishimura, SPE ANTEC™ Technical Papers, 63, Anaheim 2017, pp.778-782, 2017 |
| 70 | “Evaluation of Consumption Process on Antioxidants in Polyethylene by Chemiluminescence Measurement Method”, Koichi Hanamura, Hiroyuki Nishimura, Kazushi Yamada, Kazuhisa Igawa, and Kiyomi Okada, SPE-ANTEC Technical Papers, 62, pp.1484-1487, 2016 |
| 69 | “Effect of Residual Chlorine on Durability of Plastic Pipes Used for Hot Water Supply”, Takehiro Fujii, Hideo Hirabayashi, Kazushi Yamada, Hiroyuki Nishimura, Kazuhisa Igawa, and Yuji Higuchi, SPE-ANTEC Technical Papers, 62, pp.1479-1483, 2016 |
| 68 | “Crystallinity Distribution Analysis by Raman Mapping for Polyethylene of Raised Temperature Resistance after Long-term Hot Water Immersion Tests”, Hidekazu Honma, Hiroshi Ito, Naoko Matsuo, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 62, pp.1475-1478, 2016 |
| 67 | “Effect of Rubber Addition on Structure and Property Distribution of Thin-Wall Injection Molded Polypropylene”, Keisuke Maeda, Chikako Ohsara, Koji Yamada, Mikihiko Fujiwara, Kazushi Yamada, Masaya Kotaki, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 62, pp.1112-1115, 2016 |
| 66 | “Degradation Inspection of GFRP Storage Tank with Long-Term Use Under Hydrochloric Acid”, Masumi Ikegami, Yoshimichi Fujii, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 62, pp.372-376, 2016 |
| 65 | “Mechanical Properties and Effects of Additives of Cellulose-PLA Composite”, Hiroki Sakamoto, Yoshiki Hashimoto, Kazushi Yamada, Hiroyuki Nishimura, and Yoshikazu Kondo, SPE-ANTEC Technical Papers, 62, pp.251-255, 2016 |
| 64 | "A New Evaluation Method of O-Ring Rubber Seals by Compressive Load Test", Yuya Yokohama, Toru Hotta, Kazushi Yamada, Hiroyuki Nishimura, Hideto Kurokawa, Yuji Higuchi, Kazuhisa Igawa, and Chihomi Takami, SPE-ANTEC Technical Papers, 61, pp.875-879, 2015 |
| 63 | "Development of Ring Tensile Creep Test Method for Composite Pipes", Tomohiro Tanishita, Kazushi Yamada,Hiroyuki Nishimura, Yuji Higuchi, Kazuhisa Igawa, and Katsuhisa Yamashita, SPE-ANTEC Technical Papers, 61, pp.2071-2075, 2015. |
| 62 | "Effects of Cycloalkylcarboxylic acid Derivatives as Coadsorbents on the Photovoltaic Performance of Dye-Sensitized Solar Cells", Hiroaki Matsuyoshi, Shinichi Kawasaki, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 61, pp.758-762, 2015. |
| 61 | "Study of Sealed Parts of Fluorine Film by Laser Advanced Welding of Plastics Method", Kazushi Yamada, Katsuhiko Ueda, Kimitoshi Satoh, and Yasuo Kurosaki, SPE-ANTEC Technical Papers, 61, pp.1594-1597, 2015. |
| 60 | "Visualisation of Degraded Parts by Applying FT-IR Imaging and EDS Analysis", Kiyomi Okada, Tetsuya Tsujii, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 61, pp.2449-2453, 2015. |
| 59 | "Evaluation of Long-Term Performance Of GFRTP For Hot Water Supply", Atsushi Takeda, Hiroyuki Yamamoto, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 61, pp.501-505, 2015. |
| 58 | "Evaluation of Mechanical Properties of Cellulose Composite", Hiroki Sakamoto, Yoshiki Hashimoto, Kazushi Yamada, Hiroyuki Nishimura, andYoshikazu Kondo, SPE-ANTEC Technical Papers, 61, pp.229-233, 2015. |
| 57 | "Evaluation of Plastic Pipes for Hot Water Supply and Heating", Kazuhisa Igawa, Yuji Higuchi, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 61, pp.2076-2080, 2015. |
| 56 | "Degradation Analysis for Polyethylene of Raised Temperature Resistance after Long-Term Hot Water Immerssion and Hot Air Exposure Tests", Hidekazu Honma, Hiroshi Ito, Naoko Matsuo, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 61, pp.2067-2070, 2015. |
| 55 | “Evaluation of Natural Fiber Reinforced Recycled Polypropylene Composites”, Nobuyuki Imamura, Hiroki Sakamoto, Yuji Higuchi, Hiroyuki Yamamoto, Shinichi Kawasaki, Kazushi Yamada, Hiroyuki Nishimura, Takahiro Nishino, SPE-ANTEC Technical Papers, 60, pp.587-594, 2014. |
| 54 | "Effect of Heater Surface Shape for Heat-Sealed Parts on Oriented Polypropylene/Cast Polypropylene (OPP/CPP) Film", Kazushi Yamada, Reiichi Konishi, Yasuo Hashimoto, Yumi Hashimoto, Tetsuya Tsujii, Ken Miyata, SPE-ANTEC Technical Papers, 60, pp.1309-1313, 2014. |
| 53 | "Effect of Polycarbonate Oligomer on Internal Structure and Mechanical Property of Injection Molded Polycarbonate", Masaki Hirono, Satoshi Nagai, and Kazushi Yamada, SPE-ANTEC Technical Papers, 60, pp.25-29, 2014. |
| 52 | "Crystallization Characteristic and Heat Seal Properties of Biodegradable Films", Supaphorn Thumsorn, Sommai Pivsa-Art, Ken Miyata, and Kazushi Yamada, SPE-ANTEC Technical Papers, 60, pp.309-313, 2014. |
| 51 | "Investigation of Degradation Mechanism by Copper Catalytic Activity and Mechanical Property of Polyethylene Pipes for Hot Water Supply", Daisuke Tanemura, Kazushi Yamada, Hiroyuki Nishimura, Kazuhisa Igawa, and Yuji Higuchi, SPE-ANTEC Technical Papers, 60, pp.2002-2006, 2014. |
| 50 | "Development of Non-Destructive Inspection Mehod Using Ultrasonic Wave for Degradated GFRP Under Chemical Enviroment", Yoshiaki Tabuchi, Yoshimichi Fujii, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 60, pp.2091-2095, 2014. |
49 |
"Evaluation of Mechanical Property and Flame Resistance on Bio-Based Polymer Compounds" Nobuyuki Imamura, Hiroki Sakamoto, Yuji Higuchi, Shinichi Kawasaki, Masayuki Okoshi, Hiroyuki Yamamoto, Kazushi Yamada, Hiroyuki Nishimura, and Takahiro Nishino, SPE-ANTEC Technical Papers, 59, No.1561749, pp.1-7, 2013. |
48 |
"Effect of Polycarbonate Oligomer on Weld Properties of Injection Molded Polycarbonate and PBT Alloy Material",
Masaki Hirono, Satoshi Nagai, Kazushi Yamada, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 59, No.1591122, pp.1-5, 2013. |
47 |
"Effect of Talc Filler on Recycled PET Blends Injection Moldings", Kazushi Yamada, Hiroyuki Hamada, Shuhei Tamada, and Noriaki Kunimune, SPE-ANTEC Technical Papers, 59, No.1583984, pp.1-5, 2013. |
46 |
"Influence of Cooling Condition on Recycled PET Pellets", Kazushi Yamada, Megumi Setomoto, Hiroyuki Inoya, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 59, No.1583986, pp.1-5, 2013. |
45 |
"Observation of Higher Order Structure at Heat Seal Parts on Uniaxial Drawn PP Film", Kazushi Yamada, Reiichi Konishi, Kiyomi Okada, Tetsuya Tsujii, and Ken Miyata, SPE-ANTEC Technical Papers, 59, No.1583976, pp.1-5, 2013. |
44 |
"Evaluation of Degradation Characteristics at the Interface Between Glass Fiber and Resin of Glass Fiber Reinforced Plastics for Hot Water Application", Hiroyuki Yamamoto, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 59, No.1584868, pp.1-5, 2013. |
43 |
"Characterization of Polyethylene Pipe Degradation by FTIR Microspectroscopy Imaging Method", Kiyomi Okada, Tetsuya Tsujii, Tatsuro Ueda, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 59, No.1592244, pp.1-5, 2013. |
42 |
"Deterioration Mechanistic Evaluation of PET Film", Takahiro Hayashi, Hideo Hirabayashi, Akinori Iguchi, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 59, No.1590839, pp.1-6, 2013. |
41 |
"Evaluation of Degradation of PET film for PV backsheet by partial discharge", Akinori Iguchi, Hideo Hirabayashi, Kazushi Yamada, Hiroyuki Nichimura, Yasuhiro Uchiyama, and Jyunpei Kojima, SPE-ANTEC Technical Papers, 59, No.1590505, pp.1-6, 2013. |
40 |
"Evaluation of durability and structure of peroxide cross-linked polyethylene pipes with several stabilizers", Hideo Hirabayashi, Akinori Iguchi, Kazushi Yamada, Hiroyuki Nishimura, Kazuhisa Ikawa, and Hidekazu Honma, SPE-ANTEC Technical Papers, 59, No.1591242, pp.1-6, 2013. |
39 |
"Heat Seal Characteristic of Environmental Friendly Films From Thermoplastic Rice Starch Filled Poly(Lactic Acid)", Supaphorn Thumsorn, Kazushi Yamada, Sommai Pivsa-Art, Ken Miyata, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 59, No.1592238, pp.1-4, 2013. |
| 38 | "EVALUATION OF LONG-TERM PERFORMANCE ON COMPOSITE PIPES", Youjiro Minami, Tatsuro Ueda, Masahiro Muto, Kazushi Yamada, Yoshimichi Fujii, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 58, No.1260160, pp.1-5, 2012. |
| 37 | "FAILURE CRITERIA AND CHARACTERISTICS OF HEAT-SEALED ALUMINUM/POLYETHYLENE LAMINATES", Ichiro MITANI, Makoto NAKAMURA, Yew Wei LEONG, Yasuo HASHIMOTO, Reiichi KONISHI, Kazushi YAMADA, Hiroyuki HAMADA, Ken MIYATA, SPE-ANTEC Technical Papers, 58, No.1259953, pp.1-5, 2012. |
| 36 | "PEELABILITY AND MORPHOLOGY OF EASY-PEEL FILMS", *Kazushi YAMADA, Hiromi MATSUURA, Ken MIYATA, Yoshiaki OYA, Hiroyuki HAMADA, SPE-ANTEC Technical Papers, 58, No.1258979, pp.1-5, 2012. |
| 35 | "EFFECTS OF PHYSICAL SURFACE TREATMENT ON METAL SURFACE MORPHOLOGY AND MECHANICAL PROPERTIES OF METAL INSERT INJECTION MOLDINGS", Tomokazu SASAKI, Yuqiu YANG, Toshikazu UMEMURA, Kazushi YAMADA, Hiroyuki HAMADA, SPE-ANTEC Technical Papers, 58, No.1260248, pp.1-5, 2012. |
| 34 | "DEVELOPMENT OF DRYLESS PELLET－APPLICATION OF PELLET ENGINEERING－", Megumi SETOMOTO and Kazuhiko IYAGAWA, Hiroyuki INOYA, *Kazushi YAMADA, and Hiroyuki HAMADA, SPE-ANTEC Technical Papers, 58, No.1260105, pp.1-5, 2012. |
| 33 | "EVALUATION OF LONG-TERM DURABILITY ON POLYETHYLENE FOR HOT WATER SUPPLY", Tatsuro Ueda, Masahiro Muto, Hideo Hirabayashi, Kazushi Yamada, and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 58, No.1260181, pp.1-5, 2012. |
| 32 | "ADSORPTION AND BARRIER PROPERTIES OF PET/PP BLEND IN INJECTION MOLDING", Tadashi Otsuka, Ayako Kurosawa, *Kazushi Yamada, Hiroyuki Hamada, SPE-ANTEC Technical Papers, 58, No.1260068, pp.1-5, 2012. |
| 31 | "DEPENDENCE ON MELT VISCOSITY OF FOAM PC/ABS INJECTION MOLDING AND MECHANICAL PROPERTY", Takahiro Kunimune, Tsugio Nagasawa, Noriaki Kunimune, Kazushi Yamada*, Masuo Murakami, Hiroyuki Hamada, SPE-ANTEC Technical Papers, 58, No.1260101, pp.1-5, 2012. |
| 30 | "RECYCLE TECHNOLOGY OF USED PLASTIC MATERIALS", Nobuyuki Imamura, Masahiro Muto, Tatsuro Ueda, Kazushi Yamada, Hiroyuki Nishimura, Hiroki Sakamoto, Shinichi Kawasaki, and Takahiro Nishino, SPE-ANTEC Technical Papers, 58, No.1259657, pp.1-5, 2012. |
| 29 | "EVALUATION OF LONG-TERM PERFORMANCE OF GFRP FOR HOT WATER APPLICATION BY INJECTION MOLDING", Masahiro Muto, Kazushi Yamada and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 58, No.1260022, pp.1-5, 2012. |
| 28 | "EFFECT OF FIBER SURFACE TREATMENT ON THERMAL AND MECHANICAL PROPERTIES OF JUTE MAT REINFORCED POLYCABORNATE COMPOSITES", Smith Thitithanasarn, Kazushi Yamada, Hiroyuki Nishimura and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 58, No.1260117, pp.1-5, 2012. |
| 27 | "FILM INSERT MOLDING BASED ON POLYOXYMETHYLENE AND POLY(LACTIC ACID): MORPHOLOGY AND MECHANISM OF INTERFACIAL ADHESION", Satoshi Nagai, Makiko Sakurazawa, Kunihiko Fujimoto and Masayuki Nagai, Wongsriraksa Patcharat, Kazushi Yamada and Hiroyuki Nishimura, SPE-ANTEC Technical Papers, 58, No.1259913, pp.1-5, 2012. |
| 26 | "EFFECT OF PELLET SIZES ON MOISTURE ABSORPTION AND THERMAL DECOMPOSITION KINETIC OF RECYCLED PET/RECYCLED PP BLEND", Supaphorn Thumsorn, *Kazushi Yamada, Yew Wei Leong and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 57, pp.2231-2236, 2011. |
| 25 | "EFFECT OF LLDPE CONTENTS ON HEAT SEAL PROPERTIES FOR HDPE/LLDPE FILM", Ken Miyata, Toshiyuki Hiyama, *Kazushi Yamada, Yew W. LEONG, SPE-ANTEC Technical Papers, 57, pp.1472-1478, 2011. |
| 24 | "EFFECT OF NATURAL FIBER SURFACE TREATMENT ON THERMAL AND MECHANICAL PROPERTIES OF BAGASSE AND NYLON 11 COMPOSITES", Smith Thitithanasarn, Yew Wei Leong, *Kazushi Yamada, Hiroyuki Nishimura and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 57, pp.537-540, 2011. |
| 23 | "MISCIBILITY OF POLYOXYMETHYLENE AND POLY(LACTIC ACID)", Satoshi Nagai, Akira Itou, Wongsriraksa Patcharat, *Kazushi Yamada, Yew Wei Leong and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 57, pp.47-51, 2011. |
| 22 | "IMPROVING THERMAL RESISTANCE OF JUTE MATS USED FOR REINFORCING ENGINEERING THERMOPLASTIC", SMITH THITITHANASARN, YEW WEI LEONG, KAZUSHI YAMADA AND HIROYUKI HAMADA, Asian Workshop on Polymer Processing 2010, pp164-167. |
| 21 | "STUDY OF RECYCLED PET BLENDS INJECTION MOLDING", *KAZUSHI YAMADA, SHUHEI TAMADA, NORIAKI KUNIMUNE, YEW WEI LEONG, and HIROYUKI HAMADA, Asian Workshop on Polymer Processing 2010, pp78-81. |
| 20 | "RELATIONSHIP BETWEEN THERMAL DEGRADATION KINETICS AND FLAME RETARDANCY OF MINERAL FILLED THERMOPLASTICS", SUPAPHORN THUMSORN, KAZUSHI YAMADA, YEW WEI LEONG AND HIROYUKI HAMADA, Asian Workshop on Polymer Processing 2010, pp58-61. |
| 19 | "MECHANICAL PERFORMANCE AND FRACTURE CHARACTERISTICS OF INJECTION MOLDED R-PET/PE-E-GMA BLENDS", Noriaki Kunimune, Takahiro Kunimune, Shuhei Tamada, Kazushi Yamada, Yew Wei Leong, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 56, pp.21-26, 2010. |
| 18 | "EFFECTIVENESS OF TALC AS REINFORCEMENT FOR RECYCLED-PET/ PE-G-MA BLENDS", Noriaki Kunimune, Takahiro Kunimune, Shuhei Tamada, Supaphorn Thumsorn, Kazushi Yamada, Yew Wei Leong, Hiroyuki Hamada, SPE-ANTEC Technical Papers, 56, pp.27-31, 2010. |
| 17 | "On the Interfacial Bonding Characteristics between Polyoxymethylene and Poly(lactic acid)", Satoshi Nagai, Akira Itou, Patcharat Wongsriraksa, Supaporn Thumsorn, Yew Wei Leong, Kazushi Yamada, Hiroyuki Hamada, SPE-ANTEC Technical Papers, 56, pp.37-41, 2010. |
| 16 | "MORPHOLOGY AND MECHANICAL PROPERTIES IN WELD LINE OF INJECTION COMPRESSION MOLDINGS", Kengo Nodo, Yew Wei Leong, Kazushi Yamada, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 56, pp.514-518, 2010. |
| 15 | "EFFECTIVENESS OF SUPERCRITICAL FLUID FOR FOAMING OF POLY(LACTIC ACID) DURING INJECTION MOLDING", Norikaki Kunimune, Takahiro Kunimune, Tsugio Nagasawa, Shuhei Tamada, Kazushi Yamada, Yew Wei Leong and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 56, pp.842-845, 2010. |
| 14 | "MECHANICAL PROPERTIES OF HEAT SEALED RECYCLED POLY(ETHYLENE TEREPHTHALATE) SHRINK FILM", Rei-ichi Konishi, Kazushi Yamada, Yasuo Hashimoto, Yew Wei Leong, Tetsuya Tsujii, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, pp.2217-2220, 2010. |
| 13 | "FILM INSERT MOLDING BASED ON POLYOXYMETHYLENE AND POLY(LACTIC ACID): MORPHOLOGICAL CHARACTERISTICS AND INTERFACIAL ADHESION PROPERTIES", Satoshi Nagai and Akira Okamura, Wongsriraksa Patcharat, Kazushi Yamada, Yew Wei Leong and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 55, pp.808-811, 2009. |
| 12 | "EFFECT OF HEAT SEALING PRESSURE ON PROPERTIES OF HEAT-SEALED ORIENTED POLYPROPYLENE/CAST POLYPROPYLENE (OPP/CPP) FILM", Yumi HASHIMOTO, Yasuo HASHIMOTO, Tetsuya TSUJII, Yew Wei LEONG, Kazushi YAMADA, Hiroyuki HAMADA, SPE-ANTEC Technical Papers, 55, pp.2814-2818, 2009. |
| 11 | "MECHANICAL PROPERTIES OF HEAT-SEALED PART IN ENVIRONMENTFRIENDLY FILM", Rei-ichi Konishi, Kazushi Yamada, Yasuo Hashimoto, Yew Wei Leong, Tetsuya Tsujii, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 55, pp.2819-2823, 2009. |
| 10 | "MECHANICAL PROPERTIES OF HEAT-SEALED PART IN THERMAL LAMINATED FILM", Reiichi Konishi, Kazushi Yamada, Yasuo Hashimoto, Yew Wei Leong, Tetsuya Tsujii and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 54, pp.1460-1464, 2008. |
| 9 | "MECHANICAL AND THERMAL PROPERTIES OF MICRO- AND NANO-SILICA-FILLED PMMA MICRO INJECTION MOLDINGS", Yuka Kobayashi, Yew Wei Leong, Makoto Sarata, Hiroyuki Hamada, Kazushi Yamada, Masaya Kotaki, Kohji Yoshinaga, Hiroyuki Karakawa, Hiroshi Ito, Kunihiko Kazama andTakeshi Kikutani, 16th-International Conference on Composite Materials, WeAM1-05, pp.1-8, 2007. |
| 8 | "EVALUATION OF ORIENTED POLYPROPYLENE/CAST POLYPROPYLENE FILM AT THE HEAT-SEALING PART AND THE EDGE", Yumi HASHIMOTO, Yasuo HASHIMOTO, Yew Wei LEONG, Kazushi YAMADA, Hiroyuki HAMADA, SPE-ANTEC Technical Papers, 53, pp.1010-1013, 2007. |
| 7 | "Mechanical Properties and Morphology of PMMA Grafted Silica/PMMA Injection Molded Composites", Yuka Kobayashi, Yew Wei Leong, Makoto Sarata, Hiroyuki Hamada, Kazushi Yamada, Masaya Kotaki, Kohji Yoshinaga, Hiroyuki Karakawa, Hiroshi Ito, Kunihiko Kazama and Takeshi Kikutani, SPE-ANTEC Technical Papers, 53, pp.2000-2004, 2007. |
| 6 | "REPLICATION AND OPTICAL PROPERTIES OF INJECTION MOLDINGS WITH MICROSTRUCTURES", Osamu Murakami, Kazushi Yamada and Masaya Kotaki, SPE-ANTEC Technical Papers, 53, pp.2040-2044, 2007. |
| 5 | "EFFECT OF MOLDING CONDITIONS ON MORPHOLOGY AND STRUCTURE OF RECYCLED-PET", T. Ohta, Y. W. Leong, K. Yamada, H. Hamada, SPE-ANTEC Technical Papers, 53, pp.2272-2275, 2007. |
| 4 | "DYNAMIC MECHANICAL, THERMAL AND FRACTURE TOUGHNESS PROPERTIES OF PC/ABS BLEND SYSTEM WITH INCORPORATION OF PCOLIGOMER", T. Umemura, S. Kim, Y. W. Leong, O. B. Ogazi, K. Yamada and H. Hamada, SPE-ANTEC Technical Papers, 53, pp.2375-2377, 2007. |
| 3 | "INFLUENCE OF COMPOUNDING CONDITIONS ON MECHANICAL PROPERTIES OF RECYCLED POLY(ETHYLENE TEREPHTHALATE)", Noriaki Kunimune, Hiroyuki Inoya, Shigeyuki Nagata, Kazushi Yamada, Masaya Kotaki, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 52, pp.1455-1458, 2006. |
| 2 | "Impact properties of recycled PET prepared by reactive compounding", Noriaki Kunimune, Hiroyuki Inoya, Shigeyuki Nagata, Kazushi Yamada, Masaya Kotaki, and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 52, pp.1459-1462, 2006. |
| 1 | "REPLICATION OF INJECTION MOLDED PARTS WITH MICRO-SCALE FEATUERS", Osamu Murakami, Kazushi Yamada, Masaya Kotaki and Hiroyuki Hamada, SPE-ANTEC Technical Papers, 52, pp.2526-2530, 2006. |